Alclad II Paint - Candy Enamel Series (1 oz bottles)

Candy Enamels:

Bright Silver Candy Base:

Shake thoroughly before use. Do not thin. Surfaces must be completely clean. Apply 1 medium coat at 20-30PSI to clean bare plastic. Dry time 15-30 minutes. As the carrier evaporates the shine will develop. Allow to cure for 1 hour before coating with Alclad Candy Enamels. Avoid using in excessively damp or humid conditions.Finger marks on the bare plastic will appear in the final finish.

Candy Enamel top coats:

Shake thoroughly before use. Do not thin. Apply over Aclclad Bright Silver Candy Base. Spray light coat at 20-25PSI. Wait 5 minutes. Apply further even coasts. Allow 5 minutes between each coat. Leave to cure for 2 hours before handling.

 Candy Enamel finishes:

• Alc 701 Bright Silver Candy Base
• Alc 702 Candy Red Enamel
• Alc 703 Candy Ruby Red Enamel
• Alc 704 Candy Orange Enamel
• Alc 705 Candy Lemon Yellow Enamel
• Alc 706 Candy Golden Yellow Enamel
• Alc 707 Candy Bottle Green Enamel
• Alc 708 Candy Emerald Green Enamel
• Alc 709 Candy Electric Blue Enamel
• Alc 710 Candy Cobalt Blue Enamel
• Alc 711 Candy Indigo Enamel
• Alc 712 Candy Violet Enamel
• Alc 713 Candy Lime Green Enamel